Not your average sweatshirt, this men's midweight hoodie helps defend against the hazards of the job. It's made of flame-resistant fleece that also wicks sweat, dries fast, and fights odors. 10.5-ounce, 40% Cotton/35% Modacrylic/15% Viscose/8% Aramid /2% Antistat FR fleece Meets the performance requirements of NFPA 70E and ASTM F1506 UL® classified to NFPA 2112 Built with Force technology to wick sweat, dry fast and fight odors FastDry® technology keeps you cool for all day comfort Attached three-piece hood with adjustable FR drawcord closure Rib-knit cuffs and waist Carhartt FR and NFPA 2112/CAT 3 labels sewn on left pocket Front handwarmer pocket with inner media pocket

FEATURES : 88% Cotton 12% Nylon Twill FR Ripstop Iaminated And Combined With FR Fleece Inside 88% Cotton 12% Nylon Twill FR Ripstop As Pocket Fabric Left Straight Chest Pocket With Zipper Two Front Side Pocket With Zipper Greater Arm Mobility seam construction for maximum range of motion Lightweight comfort and warmth Zippered Chest pocket STANDARDS : NFPA 2112 - 2018 NFPA 70E PPE ASTM F1506 ARC RATING : HRC/CAT 2

Warmth Rating Earned: Level 3 - Warmest Engineered For High Warmth in Severely Cold Conditions. See Technology section below for more details. Your job is tough, and that's why you love it. This men's coat has the industry's top safety and technical features to help you stay safe and comfortable when conditions are less than ideal. It's made of lightweight yet durable duck that's water-repellent and flame-resistant. It's insulated for warmth and features stretch panels that allow you to move freely.

CAT 1 / Fabric/Material: 5.4 oz. DRIFIRE Lite Baselayer / Lightweight, breathable fabric / Inherently flame resistant, FR protection will not wash/wear out / Moisture wicking technology to keep you dryer / Odor control technology / Soft fabric prevents chafing and maximizes comfort / FR fabric will not melt, drip, or ignite / FR Elastic waist maintains shape / Concealed front opening / Made in the USA

These men's canvas cargo pants add certified flame-resistance to their durability. The midweight canvas maintains its comfortable feel and light stretch for easy movement. Cargo style pockets feature dedicated phone and utility slots to keep essentials secure and within reach. The relaxed fit gives you enough room to bend, squat, and get the job done. 9-ounce, 98% cotton / 2% spandex canvas Meets the performance requirements of NFPA 70E UL® Classified to NFPA 2112 Built to move with Rugged Flex stretch technology Comfortable fit through the seat and thigh with more room to move and a straight leg opening Strong sewn-on-seam belt loops Secure cargo pocket with utility pocket and cell phone storage Reinforced dungaree back pockets

This Portwest® FR Crew Neck is made from a 7-ounce 100% cotton material. This style features raglan sleeves for a comfortable fit as well as a front chest pocket and signature contrast stitching. This item meets the requirements of ARC 2 and ATPV 12 CAL/CM2 standards.

These FR pants are lightweight at 7.5 oz, but durable, and have a comfortable fit.They even come with a FR button at the waist, reinforced seat and knees, a 7 pocket design, and an elastic waistband. These pants also have triple stitched main seams, and a brass zipper fly made from FR zipper tape. Safety Rating HRC 2 NFPA 70E Compliant NFPA 2112 ASTM F1506 Certified ATPV 9.8 CAL/CM2 Product Features Cotton FR 7.5 oz twill 7 Pocket Design Reinforced Stiching at knees Elastic Waistband Brass zipper Fly with FR Zipper Tape Triple Stitched main seams Cotton FR button at waist

These men's canvas work pants take durability one step further with a certified flame-resistant rating. The midweight canvas maintains its comfortable feel and light stretch for easy movement. Dedicated phone and utility pockets keep essentials within reach. The relaxed fit gives you enough room to bend, squat, and get the job done. 9-ounce, 98% cotton / 2% spandex canvas Meets the performance requirements of NFPA 70E UL® Classified to NFPA 2112 Built to move with Rugged Flex stretch technology Comfortable fit through the seat and thigh with more room to move and a straight leg opening Strong sewn-on-seam belt loops Right-leg secured cell phone pocket Left-leg utility pocket Carhartt FR and NFPA 2112/CAT 2 labels sewn on coin pocket

Not your average sweatshirt, this men's midweight mock neck sweat shirt helps defend against the hazards of the job. It's made of flame-resistant fleece that also wicks sweat, dries fast, and fights odors. 10.5-ounce, 40% Cotton/35% Modacrylic/15% Viscose/8% Aramid /2% Antistat FR fleece Meets the performance requirements of NFPA 70E and ASTM F1506 UL® classified to NFPA 2112 Built with Force technology to wick sweat, dry fast and fight odors FastDry® technology keeps you cool for all day comfort Mock-neck collar with quarter-length zipper Rib-knit cuffs and waist Locker loop facilitates hanging Carhartt FR and NFPA 2112/CAT 3 labels sewn on left pocket Front handwarmer pocket with inner media pocket

FEATURES : 100% Cotton 6 Oz Inherently Aramid sewing thread Lightweight maximum comfortable fabric Ribbed collar and cuff to maintain shape Seam construction for maximum range of motion Left chest pocket

As Temperature getting low outside, This FR Hooded Pullover is must needed when you out to work. Kangaroo Pocket of this Pullover wide enough for both of your hands. FEATURES : 100% cotton 12 Oz Fleece Fleece FR 420GSM / Hoodie Inherently Aramid sewing thread Soft and comfortable fabric Ribbed cuff to maintain shape STANDARDS : UL certified NFPA2112 ARC RATING : ATPV 18cal/cm2, HRC/CAT 2

These jeans feature a larger leg opening sized to fit over work boots and TECGEN's exclusive denim has 50% more stretch than typical FR stretch denims so they move with you. These jeans offer great functionality with a conveniently placed knife strap and two utility pockets built for larger phones and tools. And with bold contrast stitching, stylish wash, finishing details and 12 oz. Inherent FR Stretch Denim, you don't need to sacrifice style for comfort or compliance. / CAT 2 / Inherently flame resistant, FR protection will not wash/wear out

This Portwest® Rain Hi Vis FR Bomber Jacket is made from a 7.5-ounce 98% Polyester 2% Antistatic Carbon Fiber PU Coated material with a 5-ounce 100% Cotton Flame Resistant Lining. This style feaures 2" FR reflective tape for extra visibility, a zipper front, and fully sealed seams. Additional features include 1cell phone pocket, 2 side pockets with flaps, 1 internal pocket, 2 mic tabs, and a detachable hood. This item meets the requirements of ANSI/ISEA 107-2015 Type R Class 3 standards.

Rasco Flame Resistant Light Weight 7.5 oz Coverall. KHAKI FIRE RETARDANT COVERALL (7.5 OZ). ATPV RATING 7.50 HRC 1. Available in Regular and Long. Coveralls feature a bi-swing back. Elastic at the waist. Left chest flap snap pocket. Pen slot on left pocket. Right chest snap pocket. Two Snaps at the collar. 2-Way front zipper. 100% Fire Retardant Cotton.

Bulwark® Protective Apparel offers flame-resistant protective garments that are certified by Underwriters Laboratories to meet the requirements of NFPA® 2112 Standard on Flame Resistant Garments for Protection of Industrial Personnel Against Flash Fire, 2023 Edition. NFPA® 2113 Standard on Selection, Care, Use and Maintenance of Flame Resistant Garments for Protection of Industrial Personnel Against Flash Fire, 2020 Edition, requires that garments cover the upper and lower body and flammable underlayers as completely as possible. Bulwark® garments meet this requirement either as a single garment such as a coverall or when worn with another certified garment such as a shirt or pants to provide both upper and lower body coverage.

At under seven ounces, this men's FR shirt is light enough to keep you moving through warm weather. It's made of flame-resistant jersey that fights off sweat and odor. The rating labels are sewn right onto the chest pocket for convenience. 6.75-ounce, 100% cotton FR jersey Meets the performance requirements of NFPA 70E UL® classified to NFPA 2112 Carhartt FR and NFPA 2112/CAT 2 labels sewn on pocket Built with Force technology to wick sweat and dry fast FastDry® technology wicks away sweat and fights odors Side-seam construction minimizes twisting Rib-knit crewneck holds its shape Left chest pocket

This high-visibility t-shirt for men is built for safety and comfort on the job. It's Carhartt-tough with flame-resistant fabric that meets the performance requirements of NFPA 70E. It's also sweat-wicking and odor-fighting. 6.5-ounce, 48% TENCEL™ Lyocell/ 40% modacrylic/12% aramid FR jersey knit Meets the performance requirements of NFPA 70E and ASTM F1507 UL® classified to NFPA 2112 Meets ANSI/ISEA 107 standard Meets ANSI Class 3, Type R visibility standard; Reflective material maintains performance through 65 home launderings Built with Carhartt Force® technology to wick sweat and dry fast FastDry® technology keeps you cool for all day comfort Rib-knit crewneck and cuffs Side-seam construction minimizes twisting Carhartt FR and NFPA 2112/CAT 2 labels sewn-on left-chest pocket

Features Greater Arm Mobility™ lets you move freely Ribbed hem and cuffs Three piece hood Side-entry hand pockets

These FR Solid Button Down Shirts are hard-working shirt with the same good looks and great fit. Flame-resistant for hazardous work environments FEATURES : 88% Cotton and 12 % Nylon 7 Oz Twill Inherently Aramid sewing thread Durable FRARCTEX FR fabric Front with FR four eyes button Double needle stitching on shoulder seams, pockets and flaps STANDARDS : UL certified NFPA 2112 - 2018 NFPA 70E PPE ASTM F1506 ARC RATING : ATPV 8.6 cal/cm2, HRC/CAT 2

4.7-Ounce, FR Twill: 50% Lenzing™ FR / 38% aramid / 10% polyaminde / 2% anti-stat Inherent fabric benefits: Flame-resistant, mositure wicking, fast-drying, colorfastness, anti-static, wrinkle-resistant FastDry® technology wicks away sweat and fights odors Button-down collar with button closure FR melamine buttons Two chest pockets with button closures Extended sleeve plackets with two-button adjustable cuffs Triple-stitched main seams Carhartt FR label sewn on left pocket; NFPA 2112/CAT 2 label sewn on sleeve placket Meets the performance requirements of NRPA 70E / ASTM F1506 and is UL® Classified to NFPA 2112